Le Blog de Obd2toolbella et Obd2toolbella

J+5098



 Divers
How to use Kess 5.017 Ktag 7.020 for Land Rover read write
VVDI Key Tool + Tango Renew and Unlock BMW Remote PCF7945
RAM 700 2016 key programming with Tango + VVDI Prog
CRP12X Premium Introduction And General Information
New Icarscan diagnostic tool
Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed)
Lonsdor K518 Read Hyundai i10 47 Pin Code and Program Smart Key by OBD
Original Autel MaxiSys MS906TS Scanner Support TPMS
Star C3 Part D & New MB W222, W217, W205 etc (Discuss)
Dealing with the frozen windshield washer fluids
BMW ICOM 2015.8 Firmware Update Guide
How to Retrofit Mercedes W204 Rear Lights by MB Star DAS
Buick Excelle 2015 remote key programming with SKP1000
How to solve mechanic replacement causes RAD2 failure
How to use Autel MaxiDAS DS808 Diagnostic System
SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK
SDconnect C4 Reviews: the best tools for programming Mercedes
15 minutes SKP900 program Ford Explorer Keyless Remote OK
Change Autel MaxiSys Pro MS908P from Spanish to English
How to use the Trigger Module of Hyundai& Kia GDS VCI V2.02 FM2.07
Cummins inline five insitefiles lated down load documents
How to Set Volvo 88890300 Vocom Wifi Connction?
Major 10 purpose to have the AUTEL MAXISYS MS906
Mini MS905 Product Attributes & Functions
What do you understand about SKP-900 critical programmer
Whatever you really should listen about NEXIQ-2
Why select GM Tech 2 scanner from obd2tool.com
The MaxiDiag Elite MD802 is the most advanced and multifunctional scan tool


  How to use Kess 5.017 Ktag 7.020 for Land Rover read write

What ECU Programming Tool is best for Land Rover read/write?New firmware KESS V2 5.017 or KTAG V7.020 is a good option?


Reply:


First, please check if your car & ECU is listed or not


KESS FW5.017 Land Rover


22-1
22-2


KTAG 7.020 Land Rover


22-3
Second, which tool do you need for Land Rover?


KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).


So,personally, i would recommend you buy KESS V2 5.017 + KTAG 7.020 together coz the bundle would not only help save a lot but better for future use. Look here:


KTAG firmware 7.020:


works better, faster and more stable than old versions


adds 100+ ECU types& supports new car models e.g.Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.
more languages available English, Italian, Portuguese,French, Deutsch, Spanish)
better wiring description (inwordsnot pictures).


Kess v2 firmware 5.017:


Compared to KESS V4.036, the KESS 5.017 has been improved a lot:


100% working
No tokens limited
with original database
4.Windows 7 & Windows 8supporting, not only Windows XP
5. supports more cars & bikes & trucks unlimited tokens, fully activated


So, with Ktag v7.020 + Kess V2 v5.017, you can read and write ECU without token limitation for OBD, Jtag, BDM and Boot use for the new models and protocols. But it cannot be used for Tricore; you need go to MPPS V18 cables.


Third, how to use KESS 5.017 or KTAG 7.020 to Read/Write Land Rover ECU Data


For KESS V2 5.017 users:you can program directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it, after you can make the read/write operation.


For KTAG 7.020 users: you need to disassemble from the car and open and this is the case for all the ECU (most Land Rover ECUs) that need to be programmed with Jtag, BDM and Boot protocols,but it is not a hard job,you can buy a LED BDM Frame together to simple your job.


For details, look here:


Recommendation:


1.Remove the ECU from the vehicle;
2.Open the ECU, taking care in not damaging the parts inside;
3.Reconnect the ECU to the vehicle and start the engine, in order to make sure that it is still working and has not been damaged in the opening;
4.Remove again the ECU from the vehicle;
5.Select the right plug-in;
6.Always make a backup copy of the ECU before Reading and / or Writing.


Instruction:


Connect to the ECU according to the pinout provided for each model (click here for connection instructions);


ECU here: EDC17 CP11 XROM TC1796


The pins Boot can be found on the left side of the ECU.


22-4


Solder a wire on pin Boot shown in the picture


22-5


Connect the cable 14P600KT02 on OBD2TOOL to the ECU connector according to the pinout below


22-6 22-7


Remove the soldered wire before re-installing the ECU on the vehicle.


Select the right plug-in;


Go to reading and programming


Backup: To make a full backup of the ECU, select Backup in the Reading box and click on Read.


Reading: Remove the check mark at the Backup option, select the component you want to read and then click on Read.


Notice: The term Maps at the side of the component indicates where the maps for engine control are stored.


Writing: Remove the check mark at the Restore option, select the component you want to write and then click on Write.


Notice: The term Maps at the side of the component indicates where the maps for engine control are stored.


Restore: To restore the backup file to the ECU, select Restore in the Writing box and click on Write.




(cliquez ici pour suivre le lien)
Message déposé le 07.01.2018 à 11:37 - Commentaires (0)




 Ajouter un commentaire

Votre nom


Votre e-mail


Votre commentaire


 Livre d'Or

 Contact



Tous les messages
How to use Kess 5.017 Ktag 7.020 for Land Rover read write
VVDI Key Tool + Tango Renew and Unlock BMW Remote PCF7945
RAM 700 2016 key programming with Tango + VVDI Prog
CRP12X Premium Introduction And General Information
New Icarscan diagnostic tool
Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed)
Lonsdor K518 Read Hyundai i10 47 Pin Code and Program Smart Key by OBD
Original Autel MaxiSys MS906TS Scanner Support TPMS
Star C3 Part D & New MB W222, W217, W205 etc (Discuss)
Dealing with the frozen windshield washer fluids
BMW ICOM 2015.8 Firmware Update Guide
How to Retrofit Mercedes W204 Rear Lights by MB Star DAS
Buick Excelle 2015 remote key programming with SKP1000
How to solve mechanic replacement causes RAD2 failure
How to use Autel MaxiDAS DS808 Diagnostic System
SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK
SDconnect C4 Reviews: the best tools for programming Mercedes
15 minutes SKP900 program Ford Explorer Keyless Remote OK
Change Autel MaxiSys Pro MS908P from Spanish to English
How to use the Trigger Module of Hyundai& Kia GDS VCI V2.02 FM2.07
Cummins inline five insitefiles lated down load documents
How to Set Volvo 88890300 Vocom Wifi Connction?
Major 10 purpose to have the AUTEL MAXISYS MS906
Mini MS905 Product Attributes & Functions
What do you understand about SKP-900 critical programmer
Whatever you really should listen about NEXIQ-2
Why select GM Tech 2 scanner from obd2tool.com
The MaxiDiag Elite MD802 is the most advanced and multifunctional scan tool


Créez votre blog sur Blog-Construction.com


0.032 sec