Le Blog de Obd2toolbella et Obd2toolbella

J+5034



 Divers
Original Autel MaxiSys MS906TS Scanner Support TPMS
Star C3 Part D & New MB W222, W217, W205 etc (Discuss)
Dealing with the frozen windshield washer fluids
BMW ICOM 2015.8 Firmware Update Guide
How to Retrofit Mercedes W204 Rear Lights by MB Star DAS
Buick Excelle 2015 remote key programming with SKP1000
How to solve mechanic replacement causes RAD2 failure
How to use Autel MaxiDAS DS808 Diagnostic System
SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK
SDconnect C4 Reviews: the best tools for programming Mercedes
15 minutes SKP900 program Ford Explorer Keyless Remote OK
Change Autel MaxiSys Pro MS908P from Spanish to English
How to use the Trigger Module of Hyundai& Kia GDS VCI V2.02 FM2.07
Cummins inline five insitefiles lated down load documents
How to Set Volvo 88890300 Vocom Wifi Connction?
Major 10 purpose to have the AUTEL MAXISYS MS906
Mini MS905 Product Attributes & Functions
What do you understand about SKP-900 critical programmer
Whatever you really should listen about NEXIQ-2
Why select GM Tech 2 scanner from obd2tool.com
The MaxiDiag Elite MD802 is the most advanced and multifunctional scan tool


  BMW ICOM 2015.8 Firmware Update Guide
BMW ICOM V2015.08 now has been released. Here is the firmware update guide and introduction of the newest ICOM.

33-1

Device to use:
BMW ICOM
Laptop (win 7 32-bit also)
BMW ICOM 2015.8 firmware update guide:
(update file in :D\ICOM_firmware-01_38_00)

1. Please connect your ICOM with LAN cable to the computer, charge ICOM via 12V power adapter.

2. Use IE explorer to open (cliquez ici pour suivre le lien), user ID/password: root / NZY11502

3. Click “update firmware”. You will get the ICOM hardware version.

4. Choose “ICOM-BootImage-01-24-00.bin”, set “image type” into “SYSTEM”, then click “send the file”.

5. When it shows “write the image file to the flash?”, click “YES”. Then the light on ICOM will turn red.

6. Then it shows “The SYSTEM IMAGE update was successful”, click “update firmware”.

7. Choose “ OBD2 Scanner ICOM-ApplicationImage-01-38-02.bin”, change “image type” into “APPLICATION”, click “send the file”. (it will take some minutes to finish)

8. When it shows “Write the image file to the flash?”, click “YES”, then the ICOM light will turn red again.

9. When all runs well, click “Reboot”.
More information about icom 2015.8:

33-2

BMW ICOM V2015.08 display:
33-3 33-4 33-5 33-6 33-7 33-8
(cliquez ici pour suivre le lien)
Message déposé le 24.09.2017 à 14:39 - Commentaires (0)




 Ajouter un commentaire

Votre nom


Votre e-mail


Votre commentaire


 Livre d'Or

 Contact



Tous les messages
Original Autel MaxiSys MS906TS Scanner Support TPMS
Star C3 Part D & New MB W222, W217, W205 etc (Discuss)
Dealing with the frozen windshield washer fluids
BMW ICOM 2015.8 Firmware Update Guide
How to Retrofit Mercedes W204 Rear Lights by MB Star DAS
Buick Excelle 2015 remote key programming with SKP1000
How to solve mechanic replacement causes RAD2 failure
How to use Autel MaxiDAS DS808 Diagnostic System
SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK
SDconnect C4 Reviews: the best tools for programming Mercedes
15 minutes SKP900 program Ford Explorer Keyless Remote OK
Change Autel MaxiSys Pro MS908P from Spanish to English
How to use the Trigger Module of Hyundai& Kia GDS VCI V2.02 FM2.07
Cummins inline five insitefiles lated down load documents
How to Set Volvo 88890300 Vocom Wifi Connction?
Major 10 purpose to have the AUTEL MAXISYS MS906
Mini MS905 Product Attributes & Functions
What do you understand about SKP-900 critical programmer
Whatever you really should listen about NEXIQ-2
Why select GM Tech 2 scanner from obd2tool.com
The MaxiDiag Elite MD802 is the most advanced and multifunctional scan tool


Créez votre blog sur Blog-Construction.com


0.004 sec